Dispensers CNG with two (2) K1 SBDD hoses: “EFIQUAL” , V.1,V.2 and V.3 type.
They basically have a system of mass gas flow-meter,
controlling valves and charging pressure limiter, charge cut-off
through electronic pressure stat( Double cut system according to
present regulations) one filter per feeding line,fluid excess cut off
valve in case of accidental hose breaking, hose with charging valve
and standardized (pico) and uncoupling valve(break away) VDR 198
model of our own development, fulfilling the present national
regulations
The control is based on an electronic microprocessor and the
following items are visualized on both sides of the pump for each
hose:
The indication of the unitary price,metallicentity of cubic meters sold,
The value of the previous purchase and the price of the present
purchase
The provision includes the metallic frame which is fixed in the place
where the pump will be placed
The dispensers will count with one feeding line The unitary price, the
density factor the hose number end the sequence speed will be
programed through the placed in the processing head The hose
number is taken into account in case it is connected to computing systems)
They also have a purchase tantalizer in non- volatile memory
They basically have a system of mass gas flow-meter,
controlling valves and charging pressure limiter, charge cut-off
through electronic pressure stat( Double cut system according to
present regulations) one filter per feeding line,fluid excess cut off
valve in case of accidental hose breaking, hose with charging valve
and standardized (pico) and uncoupling valve(break away) VDR 198
model of our own development, fulfilling the present national
regulations
The control is based on an electronic microprocessor and the
following items are visualized on both sides of the pump for each
hose:
The indication of the unitary price,metallicentity of cubic meters sold,
The value of the previous purchase and the price of the present
purchase
The provision includes the metallic frame which is fixed in the place
where the pump will be placed
The dispensers will count with one feeding line The unitary price, the
density factor the hose number end the sequence speed will be
programed through the placed in the processing head The hose
number is taken into account in case it is connected to computing systems)
They also have a purchase tantalizer in non- volatile memory
| K1- SBDD TYPE V-1 |
| K1 - SBDD TYPE V-2 (UD) |
| DISPENSERS |
| STORAGE SYSTEMS |
Consists of the reserve of gas stored at the necessary pressure for the filling of vehicles in the gas station and the
necessary lung in between charges to avoid stopping the compressor in case it is not functioning It has a direct
feeding from the compressor and it is composed of a battery of cylinders suitable to store gases in a working pressure
of
250 kg / cm2 which has been submitted to a test pressure of 375 kg/cm2 as it is certified in the tests of the
manufacturer based on regulations for each cylinder.
The cylinders are provided with their corresponding valves with Plug fuse and the whole set has a safety valve and the
possibility of to guy manually with the corresponding present regulations for this matter. The storing volume will be
approximately 1600 dm2 (liters) and the cylinders will be provided on a metallic frame as a module
Priority Panel for Storing:
Priority storing panel is a device that optimizes the charge of vehicles in the yard independent from the state or
pressure the storage has prioritize the charge for the vehicles which are connected to the dispensers, directing the
compressed gas coming from the compressor and after completing the charge, it allows the gas into the storage. As
a consequence, the charging of vehicles is faster because it is simultaneously filled by the compressor and the
gas coming from the storag.e
necessary lung in between charges to avoid stopping the compressor in case it is not functioning It has a direct
feeding from the compressor and it is composed of a battery of cylinders suitable to store gases in a working pressure
of
250 kg / cm2 which has been submitted to a test pressure of 375 kg/cm2 as it is certified in the tests of the
manufacturer based on regulations for each cylinder.
The cylinders are provided with their corresponding valves with Plug fuse and the whole set has a safety valve and the
possibility of to guy manually with the corresponding present regulations for this matter. The storing volume will be
approximately 1600 dm2 (liters) and the cylinders will be provided on a metallic frame as a module
Priority Panel for Storing:
Priority storing panel is a device that optimizes the charge of vehicles in the yard independent from the state or
pressure the storage has prioritize the charge for the vehicles which are connected to the dispensers, directing the
compressed gas coming from the compressor and after completing the charge, it allows the gas into the storage. As
a consequence, the charging of vehicles is faster because it is simultaneously filled by the compressor and the
gas coming from the storag.e
 | |  | |  | |  | |  | |  |