CP - EQ3 Compressor System
It consists of a packaged compressing unit ready to be operated with the only need of an in-out gas connection
motor strengh feeding command wiring designed for continuous automatic functioning fulfilling the national and
international regulations. Electromechanical, EFIQUAL Horizontally opposed (Z configuration) reciprocating, with
dry pistons, self lubricating compression rings .
Model CP-EQ3 TYPE : 3410
Stages: 3
Discharge Pressure: 250kg/cm2
Suction pressure: Max 18 Kg/cm2 - Min 11 Kg/cm2
Capacity: 1080 m3/h -- 900 RPM -- 100 Kw
810 m3/h -- 600 RPM -- 80 kw
HP Motor: 150 hp
Model CP-EQ3 TYPE : 3412
Stages: 3
Discharge Pressure: 250kg/cm2
Suction pressure: Max 18 Kg/cm2 - Min 11 Kg/cm2
Capacity: 1230 m3/h – 900 RPM – 125 Kw
HP Motor: 180 hp -
It consists of a packaged compressing unit ready to be operated with the only need of an in-out gas connection
motor strengh feeding command wiring designed for continuous automatic functioning fulfilling the national and
international regulations. Electromechanical, EFIQUAL Horizontally opposed (Z configuration) reciprocating, with
dry pistons, self lubricating compression rings .
Model CP-EQ3 TYPE : 3410
Stages: 3
Discharge Pressure: 250kg/cm2
Suction pressure: Max 18 Kg/cm2 - Min 11 Kg/cm2
Capacity: 1080 m3/h -- 900 RPM -- 100 Kw
810 m3/h -- 600 RPM -- 80 kw
HP Motor: 150 hp
Model CP-EQ3 TYPE : 3412
Stages: 3
Discharge Pressure: 250kg/cm2
Suction pressure: Max 18 Kg/cm2 - Min 11 Kg/cm2
Capacity: 1230 m3/h – 900 RPM – 125 Kw
HP Motor: 180 hp -
CP - EQ4 Compressor System
Electromechanical, EFIQUAL Horizontally opposed (Z configuration) reciprocating, with dry pistons, self lubricating
compression rings.
Model CP-EQ4 TYPE: 4708
Stages: 4
Discharge Pressure: 250kg/cm2
Suction pressure: Max 8 Kg/cm2 - Min 4 Kg/cm2
Capacity: 810 m3/h – 800 RPM – 105 Kw
600 m3/h – 600 RPM -- 80 Kw
HP Motor: 150 hp
Model CP-EQ4 TYPE: 4709
Stages: 4
Discharge Pressure: 250kg/cm2
Suction pressure: Max 8 Kg/cm2 - Min 5 Kg/cm2
Capacity: 910 m3/h – 900 RPM – 120 Kw
HP Motor: 180 hp
Model CP-EQ4 TYPE: 4808
Stages: 4
Discharge Pressure: 250kg/cm2
Suction pressure: Max 5 Kg/cm2 - Min 3 Kg/cm2
Capacity: 780 m3/h – 900 RPM – 110 Kw
520 m3/h – 600 RPM – 80 kw
HP Motor: 150 hp
Actioning: Through electric anti-deflagrating Engine 3 x 380 V, 50 Hz,110kw transmitted through section
belts
Cooling: Gas is electro cooled in air gas radiator with an independent circuit for discharging in each stage of
the compressor. The packet of radiator is placed in horizontal position in shape of the compression system
Controls: Oil pressure indicating panel, gas inlet pressure, interstage pressure and temperature and discharge.
Each indicator has an interrupter which activate safety devices for a maximum or minimum as it corresponds. It
also has commands to start and stop the equipment being as safe as the rest of the items in the control panel.
Commands: Distance commands with an electric motor force keyboard which includes power factor correction
and star-triangle or intelligent starting; overcharge motor protection, absence of low tension phase and electronic
head with microprocessor, with starting and stopping pulsate. Totalizator of working hours, light and acoustic
signals, electric consume indicator and alphanumeric LCD that shows (apart from the compressor state
compressing,pause,automatic,stop,etc)which kind of safety acted in case of non-automatic stops (..... Failures or
emergencies), the state in which each safety element is and allows at the same time the programming of starting
sequences times and equipment stop.
Other Components: The whole set is mounted in a metal frame constituting a Module independent from the rest
of the installation The equipment provides with all the necessary elements for its correct functioning such as
separator, check valves, relief controllers, drain controllers,thermostats and pressure stat for each step,etc
Electromechanical, EFIQUAL Horizontally opposed (Z configuration) reciprocating, with dry pistons, self lubricating
compression rings.
Model CP-EQ4 TYPE: 4708
Stages: 4
Discharge Pressure: 250kg/cm2
Suction pressure: Max 8 Kg/cm2 - Min 4 Kg/cm2
Capacity: 810 m3/h – 800 RPM – 105 Kw
600 m3/h – 600 RPM -- 80 Kw
HP Motor: 150 hp
Model CP-EQ4 TYPE: 4709
Stages: 4
Discharge Pressure: 250kg/cm2
Suction pressure: Max 8 Kg/cm2 - Min 5 Kg/cm2
Capacity: 910 m3/h – 900 RPM – 120 Kw
HP Motor: 180 hp
Model CP-EQ4 TYPE: 4808
Stages: 4
Discharge Pressure: 250kg/cm2
Suction pressure: Max 5 Kg/cm2 - Min 3 Kg/cm2
Capacity: 780 m3/h – 900 RPM – 110 Kw
520 m3/h – 600 RPM – 80 kw
HP Motor: 150 hp
Actioning: Through electric anti-deflagrating Engine 3 x 380 V, 50 Hz,110kw transmitted through section
belts
Cooling: Gas is electro cooled in air gas radiator with an independent circuit for discharging in each stage of
the compressor. The packet of radiator is placed in horizontal position in shape of the compression system
Controls: Oil pressure indicating panel, gas inlet pressure, interstage pressure and temperature and discharge.
Each indicator has an interrupter which activate safety devices for a maximum or minimum as it corresponds. It
also has commands to start and stop the equipment being as safe as the rest of the items in the control panel.
Commands: Distance commands with an electric motor force keyboard which includes power factor correction
and star-triangle or intelligent starting; overcharge motor protection, absence of low tension phase and electronic
head with microprocessor, with starting and stopping pulsate. Totalizator of working hours, light and acoustic
signals, electric consume indicator and alphanumeric LCD that shows (apart from the compressor state
compressing,pause,automatic,stop,etc)which kind of safety acted in case of non-automatic stops (..... Failures or
emergencies), the state in which each safety element is and allows at the same time the programming of starting
sequences times and equipment stop.
Other Components: The whole set is mounted in a metal frame constituting a Module independent from the rest
of the installation The equipment provides with all the necessary elements for its correct functioning such as
separator, check valves, relief controllers, drain controllers,thermostats and pressure stat for each step,etc
 | |  | |  | |  | |  | |  | |  |